KISS ULTRA V3 Flight Controller

Description

>>>>>>> Check out Wiki for up to date wiring diagram, tips and loads more <<<<<<

Hardware:

- Iconic KISS “H” form factor 30.5x30.5mm mounting (With permission of Flyduino)
- STM32H743 processor 480 MHz, 2MB FLASH, 1.28MB RAM
- IIM-42652 gyro, SPI
- BMP390 barometer
- 8 pin ESC connector, backward compatible with KISS (!!!not with FETTEC!!!). Includes current sensor pin.
- Extra solder pads for motors 5-8
- 2 serial ports on 6 pin connectors (SER1 / SER3), KISS compatible
- Overcurrent protection on all data lines
- ESD protection on USB
- 5v/12v becs (2A) with separate power on lipo and on usb. 8s capable. (first batch has 12.8v regulator).
- Dedicated current sensor pad

- Finally USB-C :)

- Better cable harness



Software improvements:
- Firmware is based on LATEST version from PATREON
- New STM32 H7 bootloader, VCP driver
- One HEX to rule them all… ??
- Smart config storage… NEVER loose your configuration…
- Optimized hardware interface layer code
- Optimized adaptive filter code (CPU load is about 8% fully loaded!!!)
- Added BLHELI Passthrough
- IRC Ghost support
- TBS CSRFv3 support (ultra code)
- Improved RTH with BARO support
- KISS Weather Station (its fun)
- NO soft serial ports anymore!
- 7 serial ports exposed (dedicated serials for SA and RC telemetry)
- Camera control (analogue, real DAC)
- UBX protocol GPS support
- Battery capacity/alerts
- DSHOT router (free routing between software and hardware channels)
- Up to 8 motors support with DSHOT2400/1wire
- Full support of all HD systems (DJI MSP, DJI WTF, DJI O3, Walksnail, HD0)


OSD features:
- Integrated Graphical OSD
- No OSD firmware update required
- Configurable Black and White levels, transparency
- FULL KISS configuration from OSD
- ESC configuration
- No serial port required, 50fps refresh rate
- Battery cell voltage sensor
- Crossfire tools

- AM32 setup tools
- Hardware test tools (rc test, gps test, video test, motor test etc)


GUI improvements:
- Forked GUI code (With permission of Flyduino)
- Design facelift, code cleanup.
- Removed odd things like pentacopters, cars and other noise.
- Web GUI without installation available at https://kiss-ultra.com/
- OSD Mirror https://youtu.be/aUqtCTAt8ik
- Native support of Apple Silicon


Abbreviations:
KISS - Keep It Super Simple
FCFC - Fedor Commander Flight Controller

In the box:
Kiss FCFC Ultra v3
8-8 cable
8-6 cable (legacy)


KISS ULTRA V3 Flight Controller

Product form

Ready to ship

£89.90

    • Guaranteed secure & safe checkout.

      shop pay
    • Shipped today? Order within: Jun 24, 2026 14:00:00 +0100

    Description

    >>>>>>> Check out Wiki for up to date wiring diagram, tips and loads more <<<<<<

    Hardware:

    - Iconic KISS “H” form factor 30.5x30.5mm mounting (With permission of Flyduino)
    - STM32H743 processor 480 MHz, 2MB FLASH, 1.28MB RAM
    - IIM-42652 gyro, SPI
    - BMP390 barometer
    - 8 pin ESC connector, backward compatible with KISS (!!!not with FETTEC!!!). Includes current sensor pin.
    - Extra solder pads for motors 5-8
    - 2 serial ports on 6 pin connectors (SER1 / SER3), KISS compatible
    - Overcurrent protection on all data lines
    - ESD protection on USB
    - 5v/12v becs (2A) with separate power on lipo and on usb. 8s capable. (first batch has 12.8v regulator).
    - Dedicated current sensor pad

    - Finally USB-C :)

    - Better cable harness



    Software improvements:
    - Firmware is based on LATEST version from PATREON
    - New STM32 H7 bootloader, VCP driver
    - One HEX to rule them all… ??
    - Smart config storage… NEVER loose your configuration…
    - Optimized hardware interface layer code
    - Optimized adaptive filter code (CPU load is about 8% fully loaded!!!)
    - Added BLHELI Passthrough
    - IRC Ghost support
    - TBS CSRFv3 support (ultra code)
    - Improved RTH with BARO support
    - KISS Weather Station (its fun)
    - NO soft serial ports anymore!
    - 7 serial ports exposed (dedicated serials for SA and RC telemetry)
    - Camera control (analogue, real DAC)
    - UBX protocol GPS support
    - Battery capacity/alerts
    - DSHOT router (free routing between software and hardware channels)
    - Up to 8 motors support with DSHOT2400/1wire
    - Full support of all HD systems (DJI MSP, DJI WTF, DJI O3, Walksnail, HD0)


    OSD features:
    - Integrated Graphical OSD
    - No OSD firmware update required
    - Configurable Black and White levels, transparency
    - FULL KISS configuration from OSD
    - ESC configuration
    - No serial port required, 50fps refresh rate
    - Battery cell voltage sensor
    - Crossfire tools

    - AM32 setup tools
    - Hardware test tools (rc test, gps test, video test, motor test etc)


    GUI improvements:
    - Forked GUI code (With permission of Flyduino)
    - Design facelift, code cleanup.
    - Removed odd things like pentacopters, cars and other noise.
    - Web GUI without installation available at https://kiss-ultra.com/
    - OSD Mirror https://youtu.be/aUqtCTAt8ik
    - Native support of Apple Silicon


    Abbreviations:
    KISS - Keep It Super Simple
    FCFC - Fedor Commander Flight Controller

    In the box:
    Kiss FCFC Ultra v3
    8-8 cable
    8-6 cable (legacy)


    Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account