,

Happymodel Moblite 6 Ultralight Tiny Whoop

Happymodel
Availability:

Sold Out!


The Moblite6 Ultralight FPV Whoop! The Moblite6 features the RunCam Nano4 Lite, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini and lightweight whoop (65mm) will take you to hard-to-get places!

£69.99

Sold Out!

Join the waitlist to be emailed when this product becomes available

The Moblite6 Ultralight FPV Whoop! The Moblite6 features the RunCam Nano4 Lite, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini and lightweight whoop (65mm) will take you to hard-to-get places!

 

Features

  • The lightest 1s 65mm brushless whoop
  • Powerful and efficiency
  • The lightest 1s AIO 5IN1 F4 flight controller
  • New Unibell EX0802 brushless motors
  • VTX power switchable 25mw~200mw
  • Low profile Canopy design
SKU: HMMOB-LT6 Categories: ,

 

Specifications

  • Brand Name: Happymodel
  • Item Name: Moblite6 1S 65mm ultra-light brushless whoop
  • Wheelbase: 65mm
  • Size: 80mm*80mm*25mm
  • Weight: 18.5g (without battery)
  • Weight:26g(with Original 1s 300mah Lipo battery )

Motor

  • Mode: EX0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.7g
  • No.of Cells(Lipo):1S only

Flight Controller

  • (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4F
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Original whoop size compatible
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky/Flysky receiver
  • Built-in 5V 1A BEC

Onboard 4-in-1 ESC

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HV
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_50_REV16_8.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 Receiver Version

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non-EU transmitter D8 model
  • Channels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard 5.8GHz VTX

  • Output power: 25mw~200mw switchable
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels(include Race band)
  • Smart audio ready

Runcam Nano 4 Lite

  • Model: RunCam Nano4 Lite
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.1mm(M8) FOV 160°
  • Signal System: PAL/NTSC Non-Switchable
  • S/N Ratio: >50dB
  • Electronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 170mA@5V 180mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.0g
  • Dimensions: L14mm*W12mm*H9mm

Lipo Battery

  • Capacity:300mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Size: 57mmx12mmx7mm
  • Weight: 7.5g
  • Connector: PH2.0